- 积分
- 59
- 下载分
- 分
- 威望
- 点
- 原创币
- 点
- 下载
- 次
- 上传
- 次
- 注册时间
- 2009-8-24
- 精华
|
本帖最后由 修叔 于 2009-9-19 23:01 编辑
PGOOD信号是由电源管理IC在确认输出的Vcore正常后发出的,如Vcore正常则为高电平,如异常则会被拉低。
PGOOD:
During normal operation PGOOD indicates whether the
output voltage is within specified overvoltage and
undervoltage limits. If the output voltage exceeds these limits
or a reset event occurs (such as an overcurrent event),
PGOOD is pulled low. PGOOD is always low prior to the end
of soft-start. |
|