迅维网

查看: 1620|回复: 5
打印 上一主题 下一主题

请教一个PWM问题。

[复制链接]
跳转到指定楼层
1#
发表于 2016-4-26 10:55:59 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式 �

马上注册,获取阅读精华内容及下载权限

您需要 登录 才可以下载或查看,没有帐号?注册

x
现在我有一张板子是RT8802A加rt9605的CPU供电方案。 。此芯片是三项的。如果我想关闭其中一组PWM的话,PWM控制信号是 悬空 还是拉低 或者还是上拉??????

2#
发表于 2016-4-26 11:05:32 | 只看该作者 �
如果想关闭一想供电话你需要看看芯片的数据手册不同的芯片有不同关闭方法。

回复 支持 反对

使用道具 举报

3#
发表于 2016-4-26 11:33:57 | 只看该作者 �
手册中引脚定义原文:PWM outputs for each driven channel. Connect these pins to the PWM input of the MOSFET driver. For systems which using 3/4 channels, pull PWM4/5 pins up to high.
拉高pwm4 pwm5可以关闭这2相

点评

饼哥 这段话是什么意思? PWM input control signal. Connect this pin to the PWM output of the controller. If the PWM signal enters and remains within the shutdown window, are both UGATE and LGATE  详情 回复 发表于 2016-4-26 15:31
回复 支持 反对

使用道具 举报

4#
发表于 2016-4-26 13:50:50 | 只看该作者 �
场管拆除后,那个驱动信号就不用处理了

回复 支持 反对

使用道具 举报

5#
发表于 2016-4-26 15:31:09 | 只看该作者 �
月饼 发表于 2016-4-26 11:33
手册中引脚定义原文:PWM outputs for each driven channel. Connect these pins to the PWM input of the  ...

饼哥   这段话是什么意思?  PWM input control signal. Connect this pin to the PWM
output of the controller. If the PWM signal enters and
remains within the shutdown window, are both UGATE
and LGATE are drived low, disabling the output MOSFETs.     

点评

问谷歌,问有道,问百度,问金山。。。。  详情 回复 发表于 2016-4-26 16:37
回复 支持 反对

使用道具 举报

6#
发表于 2016-4-26 16:37:56 | 只看该作者 �
联通移不动 发表于 2016-4-26 15:31
饼哥   这段话是什么意思?  PWM input control signal. Connect this pin to the PWM
output of the co ...

问谷歌,问有道,问百度,问金山。。。。

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表
附近
店铺
微信扫码查看附近店铺
维修
报价
扫码查看手机版报价
信号元
件查询
点位图


芯片搜索

快速回复