迅维网

标题: telnet和winscp 开SSH服务进入路由器命令行 [打印本页]

作者: 287565534 时间: 2014-3-31 08:52
标题: telnet和winscp 开SSH服务进入路由器命令行
BusyBox v0.60.0 (2010.07.24-08:33+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# help

Built-in commands:
-------------------
      . : break cd continue eval exec exit export help login newgrp
      read readonly set shift times trap umask wait

# cd /tmp
# cat /proc/mtd
dev: size erasesize  name
mtd0: 00020000 00001000 "boot"
mtd1: 003a8000 00001000 "linux"
mtd2: 00317520 00001000 "rootfs"
mtd3: 00010000 00001000 "ML1"
mtd4: 00010000 00001000 "ML2"
mtd5: 00008000 00001000 "T_Meter1"
mtd6: 00008000 00001000 "T_Meter2"
mtd7: 00001000 00001000 "POT"
mtd8: 00001000 00001000 "board_data"
mtd9: 00006000 00001000 "nvram"
#
以上是614v10的telnet信息，用winscp连接拒绝，是路由ssh服务没开，那位大哥指教一二，小弟万分感谢！

欢迎光临迅维网 (https://www.chinafix.com/)