标题: 装机出现黑屏蓝屏现象，去解释！ [打印本页] 作者: libra 时间: 2011-3-3 20:13 标题: 装机出现黑屏蓝屏现象，去解释！ 装不上机，几次重装系统均会出现蓝屏或是黑屏，
蓝屏代码如下：A recent hardware or software change might have installed a file that is signed incorrectly or damaged ,or that might be malicious software from an unkown source.
Is you have a windows installation disc ,insert the disc and restart your computer .click “repair your computer”,and then choose a recovery tool.
Otherwise ,to start windows so you can investigate futher ,press the enter key to display the boot menu,press F8 for advanced boot options,and select last know good .if you understand why the digital signature cannot be verified and want to start windows without this file .tempoorarily disable driver signature enforcement.
Status:0xc0000428
Info:windows can’t verify the digital signature for this file .
求解释;作者: pfvl2008 时间: 2011-3-3 20:17
系统光盘有问题吧，提示系统出错的，不是硬件问题！！作者: scq330 时间: 2011-3-3 20:19 本帖最后由 scq330 于 2011-3-3 20:20 编辑
a3是什么意思？你在安装系统时不是有驱动选择的吗？在那时把安装驱动的√去了就行了。要么自己整合合适你这个版本的系统。我自己的系统就是自己整合封装的。如果是网吧装机可以先装好一台后作母机做网络ghost。作者: 多多指教小弟 时间: 2011-3-4 11:58
boss设置下作者: yaofangzheng 时间: 2011-3-4 12:01
是光驱的问题,这个文件坏拉读不出,无法验证.作者: pfvl2008 时间: 2011-3-4 12:56
用U盘GHOST或者网络GHOST进去，又或者拆硬盘下来，挂到别一台机上去，将系统GHOST好再装回去。免去光盘读碟会出错的麻烦。作者: 酒到醉时 时间: 2011-5-18 08:19
你这台的光驱有问题吗
试试换光驱作者: 拉高电脑 时间: 2011-5-18 09:24
你的这个就应该是你的系统不对作者: 飘哥 时间: 2011-5-18 11:46
A recent hardware or software change might have installed a file that is signed incorrectly or damaged ,or that might be malicious software from an unkown source.
3 Y! ^) }8 W+ s3 P3 V( EIs you have a windows installation disc ,insert the disc and restart your computer .click “repair your computer”,and then choose a recovery tool.
% S4 C- S! |1 S8 I7 z1 B7 IOtherwise ,to start windows so you can investigate futher ,press the enter key to display the boot menu,press F8 for advanced boot options,and select last know good .if you understand why the digital signature cannot be verified and want to start windows without this file .tempoorarily disable driver signature enforcement.! V; j5 s: R1 @' `4 {, C( Y
Status:0xc0000428