迅维网

标题: 铭瑄x550显示字符带五颜六色 [打印本页]

作者: 骁晓 时间: 2010-10-28 18:11
标题: 铭瑄x550显示字符带五颜六色
本帖最后由骁晓于 2010-10-28 18:13 编辑

我有一个铭瑄x550的显卡，是256的显存。此卡分了四个区。我用显卡测试软件测试后，是a通道和d通道报错。我重植后，a区好了。又是b通道报错。b16-22.我加焊了gpu后，一直报错是b16-22！！！然后，我又用软件测试后，测试结果如下：：：

R3MEMID version 1.13, (c) Copyright ATI Technologies Inc, 2004
Log file generation enabled to .\R3MEMID.LOG ...
Reference data file (RDF) loading disabled ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 40 41
[2  ] Data line toggle (GUI)                            : PASS
[3  ] RW column (GUI)                                  : PASS
[4  ] RW page (GUI)                                     : PASS
[5  ] RW channel (GUI)                                  : PASS
[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[11 ] Marco+Micro8x2 alignment write                   : PASS
[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23
[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST PASSED
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST PASSED
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST PASSED
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
TEST RESULT SUMMARY:
====================
R430 A11 (0x554f) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 40 41
[2  ] Data line toggle (GUI)                            : PASS
[3  ] RW column (GUI)                                  : PASS
[4  ] RW page (GUI)                                     : PASS
[5  ] RW channel (GUI)                                  : PASS
[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23 ...
[11 ] Marco+Micro8x2 alignment write                   : PASS
[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDB0 16 17 18 19 20 21 22 23
[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST PASSED
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST PASSED
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST PASSED
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
Failure detected.
请师傅们帮我分析分析是哪里的问题啊。难道是b区有问题吗。我加焊过了！！！

我单纯的用软件测试项-----data line toggle(gui)没有问题，pass通过！！！
测试全部测试项就是上面的一连串结果！！什么问题啊！！

作者: 骁晓 时间: 2010-10-28 23:02
请求版主看看啊。什么问题了！！！

作者: 美丽的的谎言 时间: 2010-10-29 10:20
换掉报错的显存就应该好了

作者: 赵云飞章 时间: 2010-10-29 11:01
这样的我也看不懂，有介绍代码的说明文章就好了。

欢迎光临迅维网 (https://www.chinafix.com/)