迅维网

标题: 镭风X550花屏 R3测试结果，帮我看看哪个颗粒坏了 [打印本页]

作者: cflr119 时间: 2010-8-25 15:02
标题: 镭风X550花屏 R3测试结果，帮我看看哪个颗粒坏了
本帖最后由 cflr119 于 2010-8-26 11:33 编辑

R3MEMID version 1.13, (c) Copyright ATI Technologies Inc, 2004
Log file generation enabled to .\R3MEMID.LOG ...
Extended logging enabled ...
Reference data file (RDF) loading disabled ...
  [1] Fill

Failing bits in test [1] Fill
  errcount: 2
  MDA0: 12

Failing bits in test [2] Data line toggle (GUI)
  errcount: 150075
  MDA0: 12
  MDB0: 60

Failing bits in test [3] RW column (GUI)
  errcount: 1764
  MDA0: 12

Failing bits in test [4] RW page (GUI)
  errcount: 117124
  MDA0: 12
  MDB0: 60

Failing bits in test [5] RW channel (GUI)
  errcount: 6157
  MDA0: 12
  MDB0: 60

Failing bits in test [6] Data mask
  errcount: 1895976
  MDA0: 12
  MDB0: 60

Failing bits in test [7] Macro + Micro8x2 tiling read
  errcount: 165876
  MDA0: 12

Failing bits in test [8] Macro + Micro4x4 tiling write
  errcount: 214808
  MDA0: 12

Failing bits in test [9] Byte swap macro+micro8x2 read
  errcount: 2640809
  MDA0: 12
  MDB0: 60

Failing bits in test [10] Byte swap macro+micro4x4 write
  errcount: 3212632
  MDA0: 12
  MDB0: 60

Failing bits in test [11] Marco+Micro8x2 alignment write
  errcount: 972
  MDA0: 12

Failing bits in test [12] Macro+Micro4x4 alignment read
  errcount: 1797
  MDA0: 12
TEST RESULT SUMMARY:
====================
RV370/M22 A12b (0x5b63) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[2  ] Data line toggle (GUI)                            : FAIL
Error ID G0VB023
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[3  ] RW column (GUI)                                  : FAIL
Error ID G0VB024
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[4  ] RW page (GUI)                                     : FAIL
Error ID G0VB025
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[5  ] RW channel (GUI)                                  : FAIL
Error ID G0VB028
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12 MDB0 60

[11 ] Marco+Micro8x2 alignment write                   : FAIL
Error ID G0VC052
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 12

[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.14 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.14 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.14 not found
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
Failure detected.

排列图（双面，每面4颗）
                              U32 (背面U36)       U35(背面U31)

                                    X550                      U34(背面U30)

                                                                  U33(背面U29)

这卡DOS下花屏，装驱动进系统黑屏，核心加悍过无效，加焊U33，U35，U29,无效

已解决，把显存颗粒全部加焊一下，亮机正常，进系统正常，谢谢乐天

作者: 乐天 时间: 2010-8-25 19:26
先查U32 U33

作者: 蒙家大少 时间: 2010-8-26 14:11
正面的A1 B2 应该就是正面的 U33 U32
难道正面背面的U**标号一样吗？

作者: 乐天 时间: 2010-8-26 21:05
DATA线不良了，用笔尖应该能挑开

个人经验而已，别人不一定能查得到

欢迎光临迅维网 (https://www.chinafix.com/)