迅维网

标题: 9800se花屏，请指点一下 [打印本页]

作者: 圣达 时间: 2010-8-10 17:39
标题: 9800se花屏，请指点一下
今天收到一块9800se，花屏。第一次尝试修显卡，下了r3，测试结果如下，请帮忙分析一下该从哪里下手，已经加焊正反8个显存，显存周边的排阻也检测过了正常。该从哪里下手呢？

: 登录/注册后看高清大图

作者: 圣达 时间: 2010-8-10 17:39

R3MEMID version 1.13, (c) Copyright ATI Technologies Inc, 2004
Log file generation enabled to .\R3MEMID.LOG ...
Reference data file (RDF) loading disabled ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 34 56 57 58 59 60 61 62 ...

[2  ] Data line toggle (GUI)                            : FAIL
Error ID G0VB023
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[3  ] RW column (GUI)                                  : FAIL
Error ID G0VB024
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[4  ] RW page (GUI)                                     : FAIL
Error ID G0VB025
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[5  ] RW channel (GUI)                                  : FAIL
Error ID G0VB028
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[11 ] Marco+Micro8x2 alignment write                   : FAIL
Error ID G0VC052
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 3 4 5 6 7 8 9 10 ... MDD0 3 4 5 6 8 9 10 11 ...

[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 3 4 5 7 8 9 10 11 ... MDD0 3 4 5 6 7 8 9 10 ...

[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.14 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.14 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.14 not found
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
TEST RESULT SUMMARY:
====================
R350 (0x4148) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 34 56 57 58 59 60 61 62 ...

[2  ] Data line toggle (GUI)                            : FAIL
Error ID G0VB023
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[3  ] RW column (GUI)                                  : FAIL
Error ID G0VB024
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[4  ] RW page (GUI)                                     : FAIL
Error ID G0VB025
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[5  ] RW channel (GUI)                                  : FAIL
Error ID G0VB028
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 0 1 2 3 4 5 6 7 ... MDD0 0 1 2 3 4 5 6 7 ...

[11 ] Marco+Micro8x2 alignment write                   : FAIL
Error ID G0VC052
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 3 4 5 6 7 8 9 10 ... MDD0 3 4 5 6 8 9 10 11 ...

[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDC0 3 4 5 7 8 9 10 11 ... MDD0 3 4 5 6 7 8 9 10 ...

[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.14 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.14 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.14 not found
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
Failure detected.

作者: 凌寒 时间: 2010-8-10 23:01
一代的显存容易坏先把左边后面的那个换了先再测

作者: 乐天 时间: 2010-8-10 23:43
核心空焊的可能性最大

作者: moyam1220 时间: 2010-8-11 00:44
住芯片坏了和颗粒无关

作者: huangyansong 时间: 2010-8-11 01:28
核心从做.如果还不好的话,就好核心挂了

作者: 潘卓斌 时间: 2010-8-11 12:48
这样花的我一般不修了不是显存坏就是GPU要换、重值.....

作者: 圣达 时间: 2010-8-11 20:10
今天试了加焊GPU,花屏更加严重了。这两天忙，等抽空再搞搞它，不行就当料板了。谢谢各位帮忙指点!!

作者: j任我行 时间: 2010-8-18 09:11
GPU 虚焊 80%

欢迎光临迅维网 (https://www.chinafix.com/)