迅维网

标题: WD 80G 错误提示，很急，朋友们帮我看下！ [打印本页]

作者: 挥剑断情 时间: 2010-3-27 20:08
标题: WD 80G 错误提示，很急，朋友们帮我看下！
PC-3000 PCI-ACE强盗中文版2.4

先说一下，这块硬盘之前被一个人刷了固件。我是新手，大家帮忙解答一下，新人学习不易谢谢了！

开始时的自检

Techno mode key:
HDD geometry loading.................... : Ok
Cyl Count............................... : 83954
Head Count.............................. : 2
SPT..................................... : 820

RAM:
Zone allocation table................... : Ok
ROM version............................. : 77.9D.
SA FW version........................... : 77.3JW
Link table version...................... : 07.9D.

Serial ROM:
Read ROM................................ : Ok
Heads configuration..................... : From map
Heads number............................ : 2
The number of heads in use.............. : 2
Disabled heads.......................... : No
Head map................................ : 0,1

Service area:
Modules table loading................... : Ok (Copy 0)
Configuration loading................... : Ok
Master Password......................... : "WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD"
User Password........................... : has not been set
Translation overlay checking (Copy 0)... : Checksum error;Header error
Translation overlay checking (Copy 1)... : Checksum error;Header error

SA区结构测试

SA structure test

SA MODULES LIST
-------------------------------------------------------------------------------------------------------------------------
Id:Copy: Importance:Cyl :Head:Sector:Size:Read : Hdr : CS : CS Value: Date : Vers.: Desription
-------------------------------------------------------------------------------------------------------------------------
19: 0 : B : -1: 0: 2: 19:Yes : Ok : Ok : 26 :05-05-03:0100W

oaded part of microprogram code
19: 1 : B : -1: 1: 2: 19:Yes : Ok : Ok : 26 :05-05-03:0100W

oaded part of microprogram code
1B: 0 : B : -1: 0: 22: 2:Yes : Ok : Ok : 68 :05-05-03:0100W

oaded part of microprogram code
1B: 1  : B    :  -1: 1: 22: 2:Yes  : Ok  : Ok  : 68 :05-05-03:0100W :Loaded part of microprogram code
1A: 0  :          :  -1: 0: 25: 4:Yes  : Ok  : Ok  : 74 :05-05-03:0200? :
1A: 1  :          :  -1: 1: 25: 4:Yes  : Ok  : Ok  : 74 :05-05-03:0200? :
42: 0  : B    :  -2: 0:    0: 2:Yes  : Ok  : Ok  : C2 :18-08-02:0202? :Configuration (HDD ID)
42: 1  : B    :  -2: 1:    0: 2:Yes  : Ok  : Ok  : C2 :18-08-02:0202? :Configuration (HDD ID)
43: 0  : Dd    :  -2: 0:    3: 360:Yes  : Ok  :Error:  21/77  :16-05-02:0100?

-List (Primary defect list)
43: 1 : Dd : -2: 1: 3: 360:Yes : Ok : Ok : 9A :05-05-03:0200?

-List (Primary defect list)
44: 0  : C    :  -2: 0: 364: 8:Yes  : Ok  : Ok  : C8 :14-06-03:0200? :G-List (Grown defect list)
44: 1  : C    :  -2: 1: 364: 8:Yes  : Ok  : Ok  : C8 :14-06-03:0200? :G-List (Grown defect list)
59: 0  : Dr    :  -2: 0: 373: 4:Yes  : Ok  : Ok  : 51 :05-05-03:0100? :T-List (Track defect list)
59: 1  : Dr    :  -2: 1: 373: 4:Yes  : Ok  : Ok  : 51 :05-05-03:0100? :T-List (Track defect list)
5A: 0  :          :  -2: 0: 378: 1:Yes  : Ok  : Ok  : 25 :05-05-03:0100? :
5A: 1  :          :  -2: 1: 378: 1:Yes  : Ok  : Ok  : 25 :05-05-03:0100? :
20: 0  : Ad    :  -2: 0: 380: 144:Yes  : Ok  :Error:  BE/BB  :01-01-98:0401? :Translator
20: 1  : Ad    :  -2: 1: 380: 144:Yes  : Ok  :Error:  BE/BA  :01-01-98:0401? :Translator
25: 0  : Ad    :  -2: 0: 525:  15:Yes  : Ok  :Error:  B8/0E  :01-01-98:0500? :Translator
25: 1  : Ad    :  -2: 1: 525:  15:Yes  : Ok  :Error:  B8/0E  :01-01-98:0500? :Translator
23: 0  : B    :  -2: 0: 541: 6:Yes  : Ok  :Error:  93/EA  :16-05-02:0100? :Translator
23: 1  : B    :  -2: 1: 541: 6:Yes  : Ok  :Error:  93/EA  :16-05-02:0100? :Translator
4C: 0  : As    :  -2: 0: 548: 2:Yes  : Ok  : Ok  : D7 :05-05-03:0200? :Adaptive data
4C: 1  : As    :  -2: 1: 548: 2:Yes  : Ok  : Ok  : D7 :05-05-03:0200? :Adaptive data
70: 0  :          :  -2: 0: 551: 2:Yes  : Ok  : Ok  : B9 :05-05-03:0200? :
70: 1  :          :  -2: 1: 551: 2:Yes  : Ok  : Ok  : B9 :05-05-03:0200? :
72: 0  :          :  -2: 0: 554: 2:Yes  : Ok  : Ok  : B7 :05-05-03:0200? :
72: 1  :          :  -2: 1: 554: 2:Yes  : Ok  : Ok  : B7 :05-05-03:0200? :
74: 0  :          :  -2: 0: 557: 2:Yes  : Ok  : Ok  : B5 :05-05-03:0200? :
74: 1  :          :  -2: 1: 557: 2:Yes  : Ok  : Ok  : B5 :05-05-03:0200? :
4D: 0  : As    :  -2: 0: 560: 2:Yes  : Ok  : Ok  : 88 :05-05-03:0200? :Adaptive data
4D: 1  : As    :  -2: 1: 560: 2:Yes  : Ok  : Ok  : 88 :05-05-03:0200? :Adaptive data
71: 0  :          :  -2: 0: 563: 2:Yes  : Ok  : Ok  : 6C :05-05-03:0200? :
71: 1  :          :  -2: 1: 563: 2:Yes  : Ok  : Ok  : 6C :05-05-03:0200? :
73: 0  :          :  -2: 0: 566: 2:Yes  : Ok  : Ok  : 6A :05-05-03:0200? :
73: 1  :          :  -2: 1: 566: 2:Yes  : Ok  : Ok  : 6A :05-05-03:0200? :
75: 0  :          :  -2: 0: 569: 2:Yes  : Ok  : Ok  : 68 :05-05-03:0200? :
75: 1  :          :  -2: 1: 569: 2:Yes  : Ok  : Ok  : 68 :05-05-03:0200? :
18: 0  :          :  -2: 0: 572: 2:Yes  : Ok  : Ok  : 30 :16-05-02:0100? :Table 2 sectors
18: 1  :          :  -2: 1: 572: 2:Yes  : Ok  : Ok  : 30 :16-05-02:0100? :Table 2 sectors
2B: 0  : B    :  -2: 0: 575:  25:Yes  : Ok  : Ok  : 72 :16-05-02:0100? :S.M.A.R.T. Log
2B: 1  : B    :  -2: 1: 575:  25:Yes  : Ok  : Ok  : 72 :16-05-02:0100? :S.M.A.R.T. Log
4E: 0  : As    :  -2: 0: 601:  32:Yes  : Ok  : Ok  : 50 :01-01-01:0105? :Ver. Info Log
4E: 1  : As    :  -2: 1: 601:  32:Yes  : Ok  : Ok  : 50 :01-01-01:0105? :Ver. Info Log
2C: 0  : B    :  -3: 0:    0:  10:Yes  : Ok  : Ok  : 55 :16-05-02:0103? :S.M.A.R.T. Log
2C: 1  : B    :  -3: 1:    0:  10:Yes  : Ok  : Ok  : 55 :16-05-02:0103? :S.M.A.R.T. Log
2E: 0  : B    :  -3: 0: 11:  21:Yes  : Ok  :Error:  AE/15  :16-05-02:0701? :Original S.M.A.R.T. Parameters table
2E: 1  : B    :  -3: 1: 11:  21:Yes  : Ok  :Error:  AE/15  :16-05-02:0701? :Original S.M.A.R.T. Parameters table
5B: 0  :          :  -3: 0: 33: 1:Yes  : Ok  : Ok  : 51 :05-05-03:0100? :
5B: 1  :          :  -3: 1: 33: 1:Yes  : Ok  : Ok  : 51 :05-05-03:0100? :
26: 0  : B    :  -3: 0: 35:  21:Yes  : Ok  :Error:  70/2F  :16-05-02:0701? :S.M.A.R.T. Parameters
26: 1  : B    :  -3: 1: 35:  21:Yes  : Ok  :Error:  70/2F  :16-05-02:0701? :S.M.A.R.T. Parameters
22: 0  : B    :  -3: 0: 57: 6:Yes  : Ok  : Ok  : 4C :16-05-02:0100? :Translator
22: 1  : B    :  -3: 1: 57: 6:Yes  : Ok  : Ok  : 4C :16-05-02:0100? :Translator
48: 0  : As    :  -3: 0: 64: 2:Yes  : Ok  : Ok  : FF :05-05-03:0.00? :Adaptive data
48: 1  : As    :  -3: 1: 64: 2:Yes  : Ok  : Ok  : FF :05-05-03:0.00? :Adaptive data
49: 0  : As    :  -3: 0: 67: 2:Yes  : Ok  : Ok  : 5A :01-01-98:0.11? :Adaptive data
49: 1  : As    :  -3: 1: 67: 2:Yes  : Ok  : Ok  : 5A :01-01-98:0.11? :Adaptive data
4A: 0  : As    :  -3: 0: 70: 4:Yes  : Ok  : Ok  : ED :05-05-03:0100? :Adaptive data
4A: 1  : As    :  -3: 1: 70: 4:Yes  : Ok  : Ok  : ED :05-05-03:0100? :Adaptive data

作者: 挥剑断情 时间: 2010-3-27 20:09
01: 0 : B : -3: 0: 75: 12:Yes : Ok :Error: F5/50 :16-05-02:0100G

oaded part of microprogram code
01: 1 : B : -3: 1: 75: 12:Yes : Ok :Error: F5/50 :16-05-02:0100G

oaded part of microprogram code
36: 0 : B : -3: 0: 88: 38:Yes : Ok :Error: EB/5D :16-05-02:0100G

oaded part of microprogram code
36: 1  : B    :  -3: 1: 88:  38:Yes  : Ok  :Error:  EB/5D  :16-05-02:0100G :Loaded part of microprogram code
10: 0  : B    :  -3: 0: 127:  40:Yes  : Ok  :Error:  E4/53  :16-05-02:0100G :Loaded part of microprogram code
10: 1  : B    :  -3: 1: 127:  40:Yes  : Ok  :Error:  E4/32  :16-05-02:0100G :Loaded part of microprogram code
12: 0  : B    :  -3: 0: 168:  21:Yes  : Ok  :Error:  14/A8  :16-05-02:0106G :Loaded part of microprogram code
12: 1  : B    :  -3: 1: 168:  21:Yes  : Ok  :Error:  14/A8  :16-05-02:0106G :Loaded part of microprogram code
11: 0  : B    :  -3: 0: 190:  61:Yes  : Ok  :Error:  CC/49  :16-05-02:0100G :Loaded part of microprogram code
11: 1  : B    :  -3: 1: 190:  61:Yes  : Ok  :Error:  CC/94  :16-05-02:0100G :Loaded part of microprogram code
14: 0  : B    :  -3: 0: 252:  58:Yes  : Ok  :Error:  95/6E  :16-05-02:0100G :Loaded part of microprogram code
14: 1  : B    :  -3: 1: 252:  58:Yes  : Ok  :Error:  95/EF  :16-05-02:0100G :Loaded part of microprogram code
61: 0  : B    :  -3: 0: 311:  21:Yes  : Ok  : Ok  : B9 :05-05-03:0110W :Flash rewriting microprogram (LDuCODE)
61: 1  : B    :  -3: 1: 311:  21:Yes  : Ok  : Ok  : B9 :05-05-03:0110W :Flash rewriting microprogram (LDuCODE)
02: 0  : B    :  -3: 0: 333: 106:Yes  : Ok  :Error:  69/13  :16-05-02:0100G :Loaded part of microprogram code
02: 1  : B    :  -3: 1: 333: 106:Yes  : Ok  :Error:  69/F2  :16-05-02:0100G :Loaded part of microprogram code
BF: 0  :          :  -3: 0: 440: 2:Yes  : Ok  : Ok  : 5C :05-05-03:0100? :
BF: 1  :          :  -3: 1: 440: 2:Yes  : Ok  : Ok  : 5C :05-05-03:0100? :
46: 0  : As    :  -3: 0: 443:  14:Yes  : Ok  : Ok  : C7 :05-05-03:0200? :Adaptive data
46: 1  : As    :  -3: 1: 443:  14:Yes  : Ok  : Ok  : C7 :05-05-03:0200? :Adaptive data
4B: 0  : As    :  -3: 0: 458: 3:Yes  : Ok  : Ok  : 15 :05-05-03:0100? :Adaptive data
4B: 1  : As    :  -3: 1: 458: 3:Yes  : Ok  : Ok  : 15 :05-05-03:0100? :Adaptive data
21: 0  : B    :  -3: 0: 462:  10:Yes  : Ok  : Ok  : 3F :16-05-02:0103? :Event log
21: 1  : B    :  -3: 1: 462:  10:Yes  : Ok  : Ok  : 3F :16-05-02:0103? :Event log
17: 0  :          :  -3: 0: 473: 2:Yes  : Ok  : Ok  : 9B :16-05-02:0100? :Table 2 sectors
17: 1  :          :  -3: 1: 473: 2:Yes  : Ok  : Ok  : 9B :16-05-02:0100? :Table 2 sectors
2A: 0  : B    :  -3: 0: 476:  33:Yes  : Ok  : Ok  : 6B :16-05-02:0100? :S.M.A.R.T. Log
2A: 1  : B    :  -3: 1: 476:  33:Yes  : Ok  : Ok  : 6B :16-05-02:0100? :S.M.A.R.T. Log
2F: 0  : B    :  -3: 0: 510: 8:Yes  : Ok  : Ok  : 7F :16-05-02:0100? :S.M.A.R.T. Log (reserved)
2F: 1  : B    :  -3: 1: 510: 8:Yes  : Ok  : Ok  : 7F :16-05-02:0100? :S.M.A.R.T. Log (reserved)
30: 0  :          :  -3: 0: 519: 4:Yes  : Ok  : Ok  : BF :05-05-03:0100? :
30: 1  :          :  -3: 1: 519: 4:Yes  : Ok  : Ok  : BF :05-05-03:0100? :
5C: 0  :          :  -3: 0: 524: 2:Yes  : Ok  : Ok  : 9E :05-05-03:0100? :
5C: 1  :          :  -3: 1: 524: 2:Yes  : Ok  : Ok  : 9E :05-05-03:0100? :
29: 0  : C    :  -8: 0: 280:  21:Yes  : Ok  :Error:  CA/CC  :16-05-02:0701? :S.M.A.R.T. Parameters
29: 1  : C    :  -8: 1: 280:  21:Yes  : Ok  :Error:  CA/CC  :16-05-02:0701? :S.M.A.R.T. Parameters
2D: 0  : C    :  -8: 0: 303:  21:Yes  : Ok  :Error:  C6/C8  :16-05-02:0701? :S.M.A.R.T. Parameters
2D: 1  : C    :  -8: 1: 303:  21:Yes  : Ok  :Error:  C6/C8  :16-05-02:0701? :S.M.A.R.T. Parameters
FF: 0  : Dr    :  -6: 0:    0: 705:Yes  : Ok  : Ok  : FA :12-05-03:587J? :Selfscan module
FF: 1  : Dr    :  -6: 1:    0: 705:Yes  : Ok  : Ok  : FA :12-05-03:587J? :Selfscan module
C4: 0  : Dr    :  -1: 0: 80: 108:Yes  : Ok  : Ok  : 5F :12-05-03:L.0GW :Calibrations module
C4: 1  : Dr    :  -1: 1: 80: 108:Yes  : Ok  : Ok  : 5F :12-05-03:L.0GW :Calibrations module
C5: 0  : Dr    :  -1: 0: 188: 3:Yes  : Ok  : Ok  : D8 :31-03-03:L.02? :Calibrations log (DCM)
C5: 1  : Dr    :  -1: 1: 188: 3:Yes  : Ok  : Ok  : D8 :31-03-03:L.02? :Calibrations log (DCM)
EF: 0  : Dr    :  -1: 0: 191:  70:Yes  : Ok  : Ok  : E1 :12-05-03:58XXW :Selfscan test microprogram
EF: 1  : Dr    :  -1: 1: 191:  70:Yes  : Ok  : Ok  : E1 :12-05-03:58XXW :Selfscan test microprogram
E2: 0  : Dr    :  -1: 0: 261:  72:Yes  : Ok  : Ok  : B7 :12-05-03:58XXW :Selfscan test microprogram
E2: 1  : Dr    :  -1: 1: 261:  72:Yes  : Ok  : Ok  : B7 :12-05-03:58XXW :Selfscan test microprogram
E4: 0  : Dr    :  -1: 0: 333:  48:Yes  : Ok  : Ok  : FF :12-05-03:58XXW :Selfscan test microprogram
E4: 1  : Dr    :  -1: 1: 333:  48:Yes  : Ok  : Ok  : FF :12-05-03:58XXW :Selfscan test microprogram
E5: 0  : Dr    :  -1: 0: 381:  72:Yes  : Ok  : Ok  : C5 :12-05-03:58XXW :Selfscan test microprogram
E5: 1  : Dr    :  -1: 1: 381:  72:Yes  : Ok  : Ok  : C5 :12-05-03:58XXW :Selfscan test microprogram
D9: 0  : Dr    :  -1: 0: 453:  72:Yes  : Ok  : Ok  : D2 :12-05-03:58XXW :Selfscan test microprogram
D9: 1  : Dr    :  -1: 1: 453:  72:Yes  : Ok  : Ok  : D2 :12-05-03:58XXW :Selfscan test microprogram
E3: 0  : Dr    :  -1: 0: 525:  51:Yes  : Ok  : Ok  : D9 :12-05-03:58XXW :Selfscan test microprogram
E3: 1  : Dr    :  -1: 1: 525:  51:Yes  : Ok  : Ok  : D9 :12-05-03:58XXW :Selfscan test microprogram
F3: 0  : Dr    :  -1: 0: 576:  51:Yes  : Ok  : Ok  : E8 :12-05-03:58XXW :Selfscan test microprogram
F3: 1  : Dr    :  -1: 1: 576:  51:Yes  : Ok  : Ok  : E8 :12-05-03:58XXW :Selfscan test microprogram
E7: 0  : Dr    :  -1: 0: 627:  49:Yes  : Ok  : Ok  : 70 :12-05-03:58XXW :Selfscan test microprogram
E7: 1  : Dr    :  -1: 1: 627:  49:Yes  : Ok  : Ok  : 70 :12-05-03:58XXW :Selfscan test microprogram
E9: 0  : Dr    :  -1: 0: 676:  91:Yes  : Ok  : Ok  : 4D :12-05-03:58XXW :Selfscan test microprogram
E9: 1  : Dr    :  -1: 1: 676:  91:Yes  : Ok  : Ok  : 4D :12-05-03:58XXW :Selfscan test microprogram
ED: 0  : Dr    :  -2: 0: 634:  58:Yes  : Ok  : Ok  : 1F :12-05-03:58XXW :Selfscan test microprogram
ED: 1  : Dr    :  -2: 1: 634:  58:Yes  : Ok  : Ok  : 1F :12-05-03:58XXW :Selfscan test microprogram
F2: 0  : Dr    :  -2: 0: 692:  47:Yes  : Ok  : Ok  : A5 :12-05-03:58XXW :Selfscan test microprogram
F2: 1  : Dr    :  -2: 1: 692:  47:Yes  : Ok  : Ok  : A5 :12-05-03:58XXW :Selfscan test microprogram
F4: 0  : Dr    :  -3: 0: 527:  72:Yes  : Ok  : Ok  : A2 :12-05-03:58XXW :Selfscan test

作者: 挥剑断情 时间: 2010-3-27 20:09
microprogram
F4: 1  : Dr    :  -3: 1: 527:  72:Yes  : Ok  : Ok  : A2 :12-05-03:58XXW :Selfscan test microprogram
F5: 0  : Dr    :  -3: 0: 599:  69:Yes  : Ok  : Ok  : 0B :12-05-03:58XXW :Selfscan test microprogram
F5: 1  : Dr    :  -3: 1: 599:  69:Yes  : Ok  : Ok  : 0B :12-05-03:58XXW :Selfscan test microprogram
FD: 0  : Dr    :  -1: 0: 767: 5:Yes  : Ok  : Ok  : DE :12-05-03:`T0Q? :Selfscan log
FD: 1  : Dr    :  -1: 1: 767: 5:Yes  : Ok  : Ok  : DE :12-05-03:`T0Q? :Selfscan log
FB: 0  : Dr    :  -2: 0: 739:  48:Yes  : Ok  : Ok  : 4A :12-05-03:58XXW :Selfscan test microprogram
FB: 1  : Dr    :  -2: 1: 739:  48:Yes  : Ok  : Ok  : 4A :12-05-03:58XXW :Selfscan test microprogram
D0: 0  : Dr    :  -1: 0: 772: 1:Yes  : Ok  : Ok  : EE :12-05-03:587J? :Selfscan test microprogram
D0: 1  : Dr    :  -1: 1: 772: 1:Yes  : Ok  : Ok  : EE :12-05-03:587J? :Selfscan test microprogram
EC: 0  : Dr    :  -3: 0: 668:  64:Yes  : Ok  : Ok  : CF :12-05-03:58XXW :Selfscan test microprogram
EC: 1  : Dr    :  -3: 1: 668:  64:Yes  : Ok  : Ok  : CF :12-05-03:58XXW :Selfscan test microprogram
FA: 0  : Dr    :  -7: 0:    0:  70:Yes  : Ok  : Ok  : C5 :12-05-03:58XXW :Selfscan test microprogram
FA: 1  : Dr    :  -7: 1:    0:  70:Yes  : Ok  : Ok  : C5 :12-05-03:58XXW :Selfscan test microprogram
F1: 0  : Dr    :  -3: 0: 732:  49:Yes  : Ok  : Ok  : 5B :12-05-03:58XXW :Selfscan test microprogram
F1: 1  : Dr    :  -3: 1: 732:  49:Yes  : Ok  : Ok  : 5B :12-05-03:58XXW :Selfscan test microprogram
EE: 0  : Dr    :  -7: 0: 70:  66:Yes  : Ok  : Ok  : 01 :12-05-03:58XXW :Selfscan test microprogram
EE: 1  : Dr    :  -7: 1: 70:  66:Yes  : Ok  : Ok  : 01 :12-05-03:58XXW :Selfscan test microprogram
C3: 0  :          :  -7: 0: 136:  36:Yes  : Ok  : Ok  : ED :12-05-03:B.06W :
C3: 1  :          :  -7: 1: 136:  36:Yes  : Ok  : Ok  : ED :12-05-03:B.06W :
41: 0  :          :  -1: 0:    0: 2:Yes  : Ok  : Ok  : 86 :12-06-03:773JW :Modules directory
41: 1  :          :  -1: 1:    0: 2:Yes  : Ok  : Ok  : 86 :12-06-03:773JW :Modules directory
-------------------------------------------------------------------------------------------------------------------------

Zone allocation table
Number of zones......................... : 2
-------------------------------------------------------------
#  : Initial cylinder : Final cylinder    : SPT
-------------------------------------------------------------
0  : -32             : -1                : 820
1  : 0                : 83 953          : 820
-------------------------------------------------------------

CONFIGURATION SECTOR (42)
SA Copy num    Location          Status
---------------------------------------------------
   0          c: -2  H: 0       Ok
   1          c: -2  H: 1       Ok

HDD ID
Model................................... : WDC WD400EB-34CPF0
Serial number........................... : WD-WCAAT7550892
Logical parameters...................... : Cyl : 77545 Head : 16 Sec : 63
Master-password
Set..................................... : Yes
Text.................................... : WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
Hex..................................... : 5744 4357 4443 5744 4357 4443 5744 4357 4443 5744 4357 4443 5744 4357 4443 5744
User-password
Set..................................... : No
Security level.......................... : High

Log DCM (C5)
SA Copy num    Location          Status
---------------------------------------------------
   0          c: -1  H: 0       Ok
   1          c: -1  H: 1       Ok

XEN Xenon          40
+ XEN codata L.02 ----- Drive Head DCM Codes -----+
| READ-RITE: F, 0, 7, Y ( zero offset head) |
| HEADWAY: D, 8    ( zero-offset head) |
|    ALPS: A       ( zero-offset head) |
|    ALPS: L, J, H, R (non-zero offset head) |
|                                              |
+-------------------------------------------------+

Avalable scripts
"B" - B9XENL.02
"_" - _9XENL.02
"V" - V9XENL.02
"T" - T9XENL.02
"A" - A9XENL.02

Log Version Info (4E)
SA Copy num    Location          Status
---------------------------------------------------
   0          c: -2  H: 0       Ok
   1          c: -2  H: 1       Ok

ROM version............................. : 77.3JW.
Link table version...................... : 07.46.
Disk FW version......................... : 77.3JW.

P-List (43)
SA Copy num    Location          Status
---------------------------------------------------
   0          c: -2  H: 0       CS Error
   1          c: -2  H: 1       Ok

Number of defects....................... : 928

G-List (44)
SA Copy num    Location          Status
---------------------------------------------------
   0          c: -2  H: 0       Ok
   1          c: -2  H: 1       Ok

Number of defects....................... : 75

作者: 挥剑断情 时间: 2010-3-27 20:25
大家帮忙解答下，注意红字和粉字红字那两行好像是说0磁头和1磁头校检错误。下面的那些粉字就看不懂了大家看下这块硬盘怎么修？

作者: 挥剑断情 时间: 2010-3-27 21:57
看到帖子的回答下，谁有3K强盗的入门操作资料和视频我可以买 QQ381397004 谁有的可以加我QQ和我私聊注意是入门操作资料或者视频最好是图文买时候自带的那些资料就不用了。谢谢大家！

作者: 孤帆远影 时间: 2010-3-27 22:31
重新计算一下校验出错的编译器模块校验码
然后再回写改模块试试

作者: 挥剑断情 时间: 2010-3-28 17:07
6# 孤帆远影
说真的，不会。。可以详细的教教我吗？或者你写个教程卖给我也行。找不到人学习，打算上南京跟人学习一周。

欢迎光临迅维网 (https://www.chinafix.com/)