迅维网

标题: OCSET什么意思 [打印本页]

作者: 邱文兵    时间: 2009-7-9 10:13
标题: OCSET什么意思
rt9202第七角定义是OCSET,请问是什么意思
能提供中文资料最好。谢谢
作者: 张先生    时间: 2009-7-9 10:38
OCSET (Pin 7)  = 过电流设定
Connect a resistor from this pin to the drain of the respective upper MOSFET. This resistor, an internal 40μA current source, and the upper MOSFET onresistance set the converter over-current trip point. An over-current trip cycles the soft-start function. The voltage at this pin is monitored for power-on reset (POR) purpose and pulling this pin low with an open drain device will shut down the IC.


未命名.jpg
登录/注册后看高清大图

作者: 孤帆远影    时间: 2009-7-9 10:40
本帖最后由 孤帆远影 于 2009-7-9 11:40 编辑

OVER-CURRENT SET
过电流设置脚
这脚接通IC内部的一个电流源,通过一个外部电阻来设定IC的过流值。

最重要的是:该脚电位被拉低,将关闭IC的输出。理解这点就够了
作者: 心在飞翔    时间: 2009-7-9 10:48
这个脚位,一般被用来设置成开关。即以这个脚的状态。来控制IC是否工作。
作者: 李怀利    时间: 2009-7-15 12:49
此脚用在主板一般是控制  在高压板可以去保护
作者: 职权范围    时间: 2009-12-10 20:17
3# 孤帆远影


解释得非常好。谢谢版主!
作者: 15192960022    时间: 2021-3-25 10:42
irs2092s的第8脚 ocset是什么意思?干嘛用的?




欢迎光临 迅维网 (https://www.chinafix.com/) Powered by Discuz! X3.4