迅维网

标题: 两块9600花屏 [打印本页]

作者: 三年宅男 时间: 2009-7-5 00:33
标题: 两块9600花屏
新手,朋友有2块9600花了,下了论坛的ATI.EXE测试了下,看不懂结果,把结果贴上来请师傅们帮忙看看,谢谢了.
1.BGA显存的9600
TEST RESULT SUMMARY:
====================
RV350/M10 (0x4151) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 12 26
[2  ] Data line toggle (GUI)                            : FAIL
Error ID G0VB023
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[3  ] RW column (GUI)                                  : FAIL
Error ID G0VB024
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[4  ] RW page (GUI)                                     : FAIL
Error ID G0VB025
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 0 1 2 3 4 5 6 7 ... MDA1 0 1 2 3 4 5 6 7 ...
[5  ] RW channel (GUI)                                  : FAIL
Error ID G0VB028
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA1 0 1 2 3 4 5 6 7 ...
[11 ] Marco+Micro8x2 alignment write                   : PASS
[12 ] Macro+Micro4x4 alignment read                      : PASS
[13 ] Movblit, 4 align, T                               : PASS
[14 ] HOST_DATA/<f,b>/M2L                               : PASS
[15 ] Line slopes/dir/P/solid                            : PASS
Failure detected.

2.TSOP的9600
TEST RESULT SUMMARY:
====================
RV360/M11 (0x4152) detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Fill                                              : FAIL
Error ID G0VB001
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 48
[2  ] Data line toggle (GUI)                            : FAIL
Error ID G0VB023
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 16 17 18 19 20 21 22 23 ...
[3  ] RW column (GUI)                                  : FAIL
Error ID G0VB024
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 0 1 2 3 4 5 6 7 ...
[4  ] RW page (GUI)                                     : FAIL
Error ID G0VB025
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 0 1 2 3 4 5 6 7 ...
[5  ] RW channel (GUI)                                  : FAIL
Error ID G0VB028
  1024 x  768 - 16 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 0 1 2 3 4 5 6 7 ...
[6  ] Data mask                                        : FAIL
Error ID G0VB006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 16 18 20 22 25 56 58 59 ...
[7  ] Macro + Micro8x2 tiling read                      : FAIL
Error ID G0VC006
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 8 9 10 11 16 17 18 19 ...
[8  ] Macro + Micro4x4 tiling write                      : FAIL
Error ID G0VC009
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 6 7 8 10 11 16 18 19 ...
[9  ] Byte swap macro+micro8x2 read                      : FAIL
Error ID G0VC018
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 1 2 3 4 5 6 7 8 ...
[10 ] Byte swap macro+micro4x4 write                   : FAIL
Error ID G0VC021
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 0 1 2 3 4 5 6 7 ...
[11 ] Marco+Micro8x2 alignment write                   : FAIL
Error ID G0VC052
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 4 8 10 11
[12 ] Macro+Micro4x4 alignment read                      : FAIL
Error ID G0VC057
  1024 x  768 - 32 bpp ( 60 Hz): TEST FAILURE
failing bit : MDA0 4 6 8 9 10 11 33 37 ...
[13 ] Movblit, 4 align, T                               : FAIL
Error ID G0TR055
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.13 not found
[14 ] HOST_DATA/<f,b>/M2L                               : FAIL
Error ID G0TR014
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.14 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.14 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.14 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.14 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.14 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.14 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.14 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.14 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.14 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.14 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.14 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.14 not found
[15 ] Line slopes/dir/P/solid                            : FAIL
Error ID G0TR010
640 x  480 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R051A.15 not found
640 x  480 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R052A.15 not found
640 x  480 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R053A.15 not found
640 x  480 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R055A.15 not found
800 x  600 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R061A.15 not found
800 x  600 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R062A.15 not found
800 x  600 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R063A.15 not found
800 x  600 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R065A.15 not found
  1024 x  768 -  8 bpp ( 75 Hz): TEST FAILURE
   error : R071A.15 not found
  1024 x  768 - 15 bpp ( 75 Hz): TEST FAILURE
   error : R072A.15 not found
  1024 x  768 - 16 bpp ( 75 Hz): TEST FAILURE
   error : R073A.15 not found
  1024 x  768 - 32 bpp ( 75 Hz): TEST FAILURE
   error : R075A.15 not found
Failure detected.

: 登录/注册后看高清大图

: 登录/注册后看高清大图

: 登录/注册后看高清大图

: 登录/注册后看高清大图

作者: 主板狂 时间: 2009-7-5 03:10
你得用R3MEMID来测试，你这个不对。看不懂了。

作者: 黄家成！ 时间: 2009-7-5 07:40
显存芯片有问题，不过你这显卡好像没必要修了，太老了

作者: 华杰电脑 时间: 2009-7-5 14:48
这我修得多了，你把主芯片弄到BGA上加焊绝对OK

作者: 三年宅男 时间: 2009-7-5 15:30
一个说主芯片,一个说显存,该信谁的呢?

作者: 多多 时间: 2009-7-5 17:41
BGA的图片你可以先测一下最下面的那一颗显存是否空焊
DSC01046.JPG（此显卡）

作者: 无线路由器 时间: 2009-7-6 23:31
看不懂，稳当点都做一下

作者: 月饼 时间: 2009-7-7 00:06
自己换个程序再测一下。要不你就把每个数据线都打一下值吧。。。
不知道你的是大花还是小花。

欢迎光临迅维网 (https://www.chinafix.com/)