迅维网

标题: 用r6xmemid检查无错误，但进入系统后出现花屏，请高手帮分析下 [打印本页]

作者: 想爱不容易 时间: 2009-4-18 17:59
标题: 用r6xmemid检查无错误，但进入系统后出现花屏，请高手帮分析下
使用r6xmemid进行检查，结果如下：

R6XMEMID version 1.02, (c) Copyright ATI Technologies Inc, 2002
Log file generation enabled to .\R6XMEMID.LOG ...
Extended logging enabled ...
Loading Checksum and Gui CRC data from RDF file 'C:\A\R6XMEMID.M9' ...
Checksum Data Done.
No GUI CRC Data loaded from RDF.
TEST RESULT SUMMARY:
====================
Rage6 Y` detected.
128M video memory.
Test suite ran 1 of 1 times.
Checking test status array ...
[1  ] Memory Interface Data Test                         : PASS
[2  ] Memory Interface Address Test                      : PASS
[3  ] Fill ALL memory then read                         : PASS
[4  ] Read-Modify-Write                                  : PASS
[5  ] Micro+Macro tiling read                            : PASS
[6  ] 32-bit Z tiling write                            : PASS
[7  ] Byte swap z32 read                               : PASS
[8  ] Micro+Marco alignment write                      : PASS
[9  ] 16-bit Z alignment read                            : PASS
[10 ] Basic solid rectangles                            : PASS
[11 ] PM4 T3 Indirect buf                               : SKIPPED
[12 ] Line slopes/dir/P/solid                            : PASS
[13 ] HOST_DATA/<f,b>/M2L                               : PASS
[14 ] HOST_DATA/color                                  : PASS
No failures detected.

进入系统后出现部分花屏，刷新下或者切换下界面又好了，过一下又出现，运行3D画面很花甚至死机，显卡未超频，系统重新安装过，不知道是什么原因，望高人指点下。。。不胜感激！

作者: 新用户 时间: 2009-4-18 19:20
电源电路或电容问题！

欢迎光临迅维网 (https://www.chinafix.com/)